VTI Instruments EX1000A - Vtex10 Xxa_Reset_Trigger_Arm

VTI Instruments Corp.
210 EX10xxA/RX1032/EX1044 Function Calls
vtex10xxA_reset_trigger_arm
FUNCTION PROTOTYPE
vtex1048_reset_trigger_arm(ViSession vi);
FUNCTION PARAMETERS
vi = contains a session handle to the instrument. This handle is obtained by the function and remains valid until the
session is closed.
DATA ITEM RESET VALUE
Not applicable to this function.
DESCRIPTION
This function performs a reset of the trigger configuration parameters to default values, while not affecting any other
acquisition parameters. In contrast, the vtex10xxA_reset function resets all of the acquisition parameters to their
default values.
EXAMPLE