EasyManua.ls Logo

VTI Instruments EX1629 - Page 19

Default Icon
346 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.vtiinstruments.com
EX1629 Introduction 19
SHUNT CALIBRATION
INTERNAL RESISTOR
55 kΩ (0.1%, 25 ppm/°C) per channel standard (0.05%, 5 ppm/°C optional)
EXTERNAL RESISTOR
Front panel connection shared among 16 channels
Connection resistance: 16 Ω typical
RESISTOR CONNECTION
Software selectable: local (across completion resistor) or remote
QUARTER-BRIDGE STRAIN MEASUREMENTS
Excitation
Gain
Range
1
Gain Accy
2
Offset Accy
2,3
Gain TC
4
Offset TC
4
10 V
100
+30927 µε/-29126 µε
±0.12%
±25 µε
±50 ppm/ºC
±4 µε/ºC
5 V
100
+63829 µε/-56603 µε
±0.12%
±25 µε
±50 ppm/ºC
±4 µε/ºC
Note 1: Nominal for balanced bridge
Note 2: Conditions:
GF = 2.0, R
comp
= 350 Ω, balanced excitation
<30 days, ±5 ºC from last self-calibration
15 ºC to 35 ºC, 1 year from full calibration
Assumes the excitation voltage is measured and used in the conversion. Valid for 30 days, ±5 ºC.
Includes the stability effects of the excitation source.
60 minute warm-up
Exclusive of lead wire desensitization errors
Exclusive of gage errors
Exclusive of noise
Note 3: <30 days, ±5 ºC from unstrained voltage measurement.
Note 4: Only applies outside of self-calibration window
FULL-BRIDGE STRAIN MEASUREMENTS
Excitation
Gain
Range
1
Gain Accy
2
Offset Accy
2,3
Gain TC
4
Offset TC
4
5 V
100
±15000 µε
±0.05%
±1.5 µε
±50 ppm/ºC
±0.2 µε/ºC
2.5 V
100
±30000 µε
±0.06%
±3 µε
±60 ppm/ºC
±0.4 µε/ºC
Note 1: Nominal for balanced bridge
Note 2: Conditions:
GF = 2.0, balanced excitation, remote sense
<30 days, ±5 ºC from last self-calibration
15 ºC to 35 ºC, 1 year from full calibration
Assumes the excitation voltage is measured and used in the conversion. Valid for 30 days, ±5 ºC.
Includes the stability effects of the excitation source.
60 minute warm-up
Exclusive of gage errors
Exclusive of noise
Note 3: <30 days, ±5 ºC from unstrained voltage measurement.
Note 4: Only applies outside of self-calibration window
CONFIDENCE MEASUREMENTS
TOTAL EXCITATION VOLTAGE
±(0.012% + 500 µV)
±EXCITATION VOLTAGE
±(0.012% + 2.5 mV)
±EXCITATION CURRENT
±(0.1% + 50 µA)
COMMON MODE VOLTAGE
±(0.1% + 2.5 mV)
SAMPLING RATE
Approximately 500 Sa/s

Table of Contents

Related product manuals