VTI Instruments EX1629 - Page 309

www.vtiinstruments.com
EX1629 Command Set 309
Error Code
Error Message
Meaning
FFBFFC0ADF
VTEX1629_ERROR_TEDS_WRITE_SCRATCHPAD_RDBK
TEDS write scratchpad readback error.
FFBFFC0AE0
VTEX1629_ERROR_TEDS_WRITE_INFO_RDBK
TEDS write info readback error.
FFBFFC0AE1
VTEX1629_ERROR_CAL_FACTORY_CAL_NOT_PRESENT
Factory calibration not present.
FFBFFC0AE2
VTEX1629_ERROR_CAL_INCOMPLETE_CAL
Incomplete calibration.
FFBFFC0AE3
VTEX1629_ERROR_INVALID_MODE_FOR_SOFT_TRIGGER
Invalid mode for soft trigger.
FFBFFC0AE4
VTEX1629_ERROR_INVALID_MODE_FOR_SOFT_ARM
Invalid mode for soft arm.
FFBFFC0AE5
VTEX1629_ERROR_INPUT_BRIDGE_NOT_COMPLETE
Input bridge not complete.
FFBFFC0AE6
VTEX1629_WARNING_CAL_BUFFERSIZE_SMALLER_THAN_ACTUAL_SIZE
Warning: the passed in buffer / buffer
size are not large enough to hold all of
the cal data. Only buffer size amount
was stored in the buffer.
FFBFFC0AED
VTEX1629_ERROR_PTP_NOT_RUNNING
Error: PTP not running.
FFBFFC0AEE
VTEX1629_ERROR_PROFILING_NOT_ENABLED
Error: Profiling not enabled.
FFBFFC0AEF
VTEX1629_ERROR_DYNAMIC_EXCITATION_EU_ENABLED
Can not set EU conversion on a channel
where dynamic excitation EU conversion
mode is enabled.
FFBFFC0AF0
VTEX1629_TEMP_DIR_WRITE_PROTECTED
Error: The temporary directory C:\Temp
either does not exist or is write-
protected.
None
VI_WARN_NSUP_SELF_TEST
WARNING: Self-Test not supported.
None
VI_WARN_NSUP_ERROR_QUERY
WARNING: Error Query not supported.