VWR AVANTOR E-BURETTE - Getting Started

Getting Started
Switching on the control panel
1. Switch on the instrument using the ON/OFF switch at the back of the control panel.
2. When it boots, the instrument will warn the user to switch the knob to recirculation mode.
3. Turn the knob to re-circulation mode and click the tick mark (✓) on
the control panel screen when ready.
(Fig. 27)
4. The instrument will reset automatically. It is now ready to use.
Purging
● This step is recommended before using the Burette to ensure bubble free dispensing.
1. Click on the purging mode from the Home Screen on the control panel. (Fig. 28)
Fig. 26
Fig. 27
Fig. 28
(Fig. 26)
14 vwr.com I Instruction manual VWR
®
E-Burette