VWR AVANTOR E-BURETTE - General Maintenance

● Procedure to Assemble the Delivery Pipe:
1. First push the delivery pipe into the lower housing till it stops going
in further.
(Fig. 62)
2. Screw the chuck nut to complete the assembly by turning it in
clockwise direction.
(Fig. 63)
Note: Use rubbing alcohol on a cloth or cotton to clean the external
body.
Fig. 62
Fig. 63
General Maintenance
Whenever cleaning is required, run the dispenser under distilled water. Fill the barrel
completely with distilled water and press the fast dispense button to dispense the water
completely.
● Procedure to Disassemble the Delivery Pipe:
1. Unscrew the chuck nut by rotating it in anticlockwise direction and
pull out the delivery pipe.
(Fig. 61)
2. Clean the delivery pipe with de-ionized water.
Fig. 61
25 vwr.com I Instruction manual VWR
®
E-Burette