Commissioning
Safety instructions for operation 8.1
27
[en-US] | 10/2022 | 5100056183 | BH | Operator’s Manual
CAUTION
Danger as a result of splintering or spinning material!
Splintering or spinning material can lead to injuries.
► Use protective gloves.
► Use safety goggles.
CAUTION
Danger due to extreme dust generation!
Inhalation of dust can cause damage to the health of the respiratory tract.
► Use a dust mask.
► Use sprinkler.
CAUTION
Risk of injury when driving in piles!
Falling machine or tools can lead to injuries.
► Use suitable tools.
► Use a hard hat.
► Use safety goggles.
NOTICE
Information on operation at temperatures < 0°C!
The cold grease in the percussion mechanism can increase the resis-
tance to such an extent that the centrifugal clutch slips.
► Warm up the machine at low speed (do not press the throttle grip),
otherwise the centrifugal clutch will wear out within a very short time.
NOTICE
Information on the use of tools!
Only use tools with the following properties:
► The tool must be suitable for the tool holder.
► The tool insert must be undamaged.
► The tool must be sharp enough to avoid ricochets and increased vi-
bration.
► The tool must be suitable for the intended purpose.
► Do not use the tool (e.g. chisel) as a hand tool.
8
To Next Page
Loading...
