Wacker Neuson BH - Setting the Machine; Putting into Operation

Commissioning
8.5 Setting the machine
30
Operator’s Manual | BH | 5100056183 | 10/2022 | [en-US]
Remove tool
1. Press handle 3 on the tool holder 4.
2. Remove tool 1 from the tool holder .
3. Lock the handle on the tool holder.
8.5 Setting the machine
8.5.1 Machine with integrated switch-off device - rs (optional)
Information
Short-circuit plug 1 can be inserted and stored in handle 3.
1
2
The machine is only functional if the connection bushing 2 of the inte-
grated disconnection device is fitted with either the remote disconnection
plug or the short-circuit plug 1 .
8.6 Putting into operation
8.6.1 Carrying out preparations
1
2
3
1. Place the machine upright and hold it with one hand.
2. Open the fuel cock 1.
3. Press the bellows of the fuel pump 2 about ten times, until the bel-
lows is completely filled with fuel.
4. Close choke 3.