Technical Data
General instructions 14.1
45
[en-US] | 10/2022 | 5100056183 | BH | Operator’s Manual
14 Technical Data
14.1 General instructions
Information
For system technical reasons, empty columns can be displayed in the
technical data, and numbers and letters that written in superscript or sub-
script may be displayed incorrectly, e.g:
► Sound power level LWA instead of L
WA
► Sound pressure level LpA instead of L
pA
► Vibration total value ahv instead of a
hv
► Carbon dioxide CO2 instead of CO
2
► Unit m/s2 instead of m/s
2
14.2 Noise and vibration data
The noise and vibration data listed have been determined in accordance
with the following guidelines for the typical machine operating conditions /
special test conditions and using harmonized standards:
• Machinery Directive 2006/42/EC
• Noise Emission Directive 2000/14/EC
During operational use, values may differ depending on the prevailing op-
erating conditions.
14.2.1 Noise information
Sound pressure level at operator station
• L
pA
was determined according to EN ISO 11203.
Guaranteed sound power level
• L
WA
was determined according to 2000/14/EG, EN ISO 3744.
14.2.2 Vibration indication hand-arm vibration (HAV)
Weighted vibration total value
• a
hv
was determined according to EN ISO 28927-10.
14.3 BH19
Type BH19 27x80
Material number machine 5100048663
Material number engine 5100045178
Number of strokes [1/min] 1.650
Single stroke energy [J] 40
Length (without tool) [mm] 843
Width [mm] 492
14
To Next Page
Loading...
