Wacker Neuson BH - Maintenance Work

Maintenance
10.3 Maintenance work
36
Operator’s Manual | BH | 5100056183 | 10/2022 | [en-US]
Activity
Daily be-
fore
Operating Every 20h Every 40h
Once a
month
Once a
year
Check the tool holder for wear. Have replaced
if necessary.*
●
Have the fuel filter changed.* ●
* Have this work carried out by a service partner.
10.3 Maintenance work
Working in the workshop
Carry out maintenance work in a workshop on a workbench. This has the
following advantages:
• Protection of the machine against dirt from the construction site.
• An even and clean work surface facilitates the work.
• Small parts are easier to keep track of and are not easily lost.
Carrying out preparations
1. Decommissioning the machine.
2. Secure the machine against tipping over. Either place the machine
on the transport trolley or on the back of the hood.
3. Let the machine cool down.
10.3.1 Cleaning the machine
1. Clean the ventilation slots with a suitable tool.
2. Clean machine with compressed air.
3. Wipe the housing with a damp and clean cloth.
10.3.2 Add fuel
CAUTION
Danger to health from fuel!
► Only refuel in a well-ventilated environment.
► Do not inhale fuel vapors.
► Avoid skin or eye contact with fuel.
NOTICE
Note on refilling fuel!
► Open the tank cap slowly so any excess pressure present can slowly
escape.