RD 16 Operation
wc_tx001075gb.fm 37
3.8 Seat Belt
See Graphic: wc_gr002238
Pull seat belt (c) out of the retractor in a continuous motion.
Fasten seat belt catch (b) into buckle (a). Make sure that the seat belt
is placed low across the lap of the operator.
The retractor will adjust the belt length and the retractor will lock in
place.
Push the release button (d) on the buckle in order to release the seat
belt. The seat belt will automatically retract into the retractor.
Replace the seat belt every three years.
wc_gr002238
a
b
c
d
To Next Page
Loading...
Need help?
General
