EasyManuals Logo
Home>Wacker Neuson>Construction Equipment>RD 16

Wacker Neuson RD 16 User Manual

Wacker Neuson RD 16
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
RD 16 Maintenance
wc_tx001076gb.fm 71
4.7 Fuel Filter
See Graphic: wc_gr002999
4.7.1 Change the fuel filter (a) every 300 hours of operation. Remove the
filter (a) from the filter head (c).
4.7.2 Install the new filter. If necessary, prime the fuel lines. See section RD
16 Priming the Fuel System.
Gasoline is extremely flammable! Turn the engine off and allow the
engine to cool before replacing the fuel filter.
4.8 Priming the Fuel System
See Graphic: wc_gr002999
If the fuel tank has been run completely dry or drained for service, it
may be necessary to manually prime the fuel system.
To prime the fuel system:
4.8.1 Turn the ignition switch to the ON position (60). This will open the fuel
valve.
4.8.2 Pump the lever on the fuel pump (b) until there is an increase in
pumping effort.
WARNING
wc_
g
r002999
b
a
c

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson RD 16 and is the answer not in the manual?

Wacker Neuson RD 16 Specifications

General IconGeneral
BrandWacker Neuson
ModelRD 16
CategoryConstruction Equipment
LanguageEnglish

Related product manuals