RD 16 Operation
wc_tx001075gb.fm 45
3.16 Position of the Operator
Safe and efficient use of this machine is the operator’s responsibility.
Full control of the machine is not possible unless the operator
maintains the proper working position at all times.
While operating this machine, the operator must:
• be seated in the operator’s seat facing forward
• wear the seat belt, properly adjusted and latched
• have both feet on the control deck
• have one hand on the steering wheel at all times
• have the other hand free to operate the controls as needed
3.17 Preparing the Machine for First Use
Preparing for first use
To prepare your machine for first use:
3.17.1 Make sure all loose packaging materials have been removed from the
machine.
3.17.2 Check the machine and its components for damage. If there is visible
damage, do not operate the machine! Contact your Wacker Neuson
dealer immediately for assistance.
3.17.3 Take inventory of all items included with the machine and verify that
all loose components and fasteners are accounted for.
3.17.4 Attach component parts not already attached.
3.17.5 Add fluids as needed and applicable, including fuel, engine oil, and
battery acid.
3.17.6 Move the machine to its operating location.
To Next Page
Loading...
