RD 16 Operation
wc_tx001075gb.fm 47
3.18 Before Starting
Before starting the machine check the following:
• Engine oil level
• Engine coolant level
• Hydraulic fluid level
• Condition of fuel lines
• Condition of air cleaner
• Operation of the brake system
• Fuel level
• Water level
• Condition of safety belt
• Scraper bars—clean and properly adjusted
Note: All fluid levels should be checked with the machine on a level
surface.
Ensure that regular maintenance has been carried out.
Ensure that the driver's platform is clean.
Always use the steps and handrails when climbing on and off the
machine.
Always wear the seat belt provided when operating the roller.
WARNING
To Next Page