Wacker Neuson WP Series User Manual

8 Transport
20 100_0202_tr_0014.fm
8 Transport
8.1 Loading and transport
Previous conditions
 To transport the vibratory plate, only use suitable lifting gear with a minimum load-bearing capacity
of 150 kg.
 Always switch off the engine during transport!
 Attach suitable tackle to the intended central lifting point.
Carry out preparations
During loading and transport, the control handle must be folded down.
WARNING
Improper handling may result in injury or serious material damage.
 Please read and follow all safety instructions in this operator's manual.
DANGER
Danger from falling.
Falling machines can cause serious injury e.g. through crushing.
 Only use suitable and tested lifting gear and tackle (safety load hooks) of sufficient
lifting capacity.
 Only lift the machine from the central lifting point.
 Reliably secure the machine to the lifting gear.
 Do not lift the machine with a crane by the control handle and handle grip.
 Evacuate danger zone while lifting, do not stop under suspended loads.
WARNING
Risk of fire and explosion from fuel.
Escaping fuel may catch fire and cause serious burns.
 Lift and transport the machine upright.
NOTICE
Wacker Neuson recommends emptying the fuel tank prior to transport.

Wacker Neuson WP Series Specifications

General

Brand	Wacker Neuson
Model	WP Series
Category	Power Tool
Language	English