Contents
Index
Contents Index
46
46
APPLICATION-SPECIFIC SETTINGS
You can customize your tools for use with a particular application. For example, you may prefer a firm pen
tip pressure setting in one application and a soft pressure setting in another. The A
PPLICATION list enables
you to add an individual application to the list and then customize your tool settings for that application.
• When no application-specific settings have been created and a tool is selected from the T
OOL list, the
A
PPLICATION list displays the ALL icon which contains tool settings that apply to all of your applications.
In the example below, no application-specific settings have been added for the P
RO PEN. The ALL icon
is displayed and the P
RO PEN will have the same settings in all applications.
• When application-specific settings are added, the A
LL icon changes to ALL OTHER and an application
icon is displayed for the newly added application(s).
In the above example, application-specific settings have been added for the P
RO PEN. If you select the
A
LL OTHER icon and make changes to the PRO PEN settings, your changes will apply to the PRO PEN in
all applications except those which you have added to the A
PPLICATION list. If you select an application
icon and make changes to the P
RO PEN settings, your changes will apply to the PRO PEN while you are
using that application only.
When you create application-specific settings, you are creating a separate group of settings for the
selected tool and application. See the following sections for more details:
Creating an application-specific setting
Changing application-specific settings
Removing application-specific settings
Tip: To review ExpressKey, Rocker Ring, or pen function settings for the front-most application, set the
ExpressKey or Rocker Ring to S
ETTINGS and press the key at any time.ff
To Next Page
Loading...
