Current Pressure: To see how hard you need to press with the pen, check your Current Pressure by
pressing down with the pen tip or eraser in an empty area of the Wacom Tablet Properties window.
If you want to change the amount of pressure you need to use the pen tip or eraser, move the Tip Feel
and Eraser Feel sliders.
Options: To select the way you right-click with the pen, click Options and select a different Pen Button
Mode.
Tilt Sensitivity: To change how much the tilt of your hand affects your pen strokes, drag the slider. Open an
application that supports tilt to test while you are adjusting, so you can see how your changes affect your
strokes.
Pen Feel Details: To change the tip sensitivity, click Customize and adjust advanced pen and eraser
options.
Tips:
Set the pen tip to Click and one of the pen buttons to Double-Click.
If you want a narrower range of pressure values in a pressure-sensitive application, select a soft Tip Feel.
If the pen overreacts to slight pressure, try a firmer Tip Feel setting.
If you notice a delay at the beginning of brush strokes, inking strokes, or drag actions, try a smaller Tip
Double Click Distance or set a pen button to double-click instead of the pen tip.
You can return the pen to default settings by going to the Pen tab in Wacom Tablet Properties and clicking
Default.
| Cookies | Terms of use | Privacy Policy | California Privacy
To Next Page
Loading...
