12
GM 5000EA
OPERATING MANUAL
EDITION 07/2014
ORDER NUMBER DOC
2344499
3.3 PERMISSIBLE DEVICE COMBINATIONS
The GM 5000EA manual spray gun may only be connected to the control units listed below:
VM 500 controller
VM 5000 controller
Incorrect use!
Risk of injury and equipment damage.
Connect the GM 5000EA manual spray gun only to original
Wagner control units.
WARNING
Surface spraying, electrostatics
Never spray device parts using electrostatic equipment (electrostatic spray gun!).
Medium supporting atomizing
To atomize the product, use only weakly oxidizing gases, e.g. air.
Cleaning
If there are deposits on the surfaces, the device may form electrostatic charges. Flames or
sparks can form during discharge.
Remove deposits from the surfaces to maintain conductivity.
Only use a damp cloth to clean the device.
To Next Page
Loading...
