3
GM 5000EA
OPERATING MANUAL
EDITION 07/2014
ORDER NUMBER DOC
2344499
Contents
1 GENERAL 6
1.2 Warnings, Notices, and Symbols in this Operating Manual 6
1.3 Languages 7
1.4 Abbreviations 7
2 CORRECT USE 8
2.1 Device Type 8
2.2 Correct Use 8
2.3 Use in an Explosion Hazard Area 8
2.4 Safety Parameters 8
2.5 Processible Products 9
2.6 Reasonably Foreseeable Misuse 10
2.7 Residual Risks 10
3 IDENTIFICATION 11
3.1 Explosion Protection Identi cation FM 11
3.2 Information for safe and correct operation 11
3.3 Permissible Device Combinations 12
4 GENERAL SAFETY INSTRUCTIONS 13
4.1 Safety Instructions for the Operator 13
4.1.1 Electrical Equipment 13
4.1.2 Sta Quali cations 13
4.1.3 Safe Work Environment 13
4.2 Safety Instructions for Sta 13
4.2.1 Safe Handling of WAGNER Spray Devices 14
4.2.2 Grounding the Device 14
4.2.3 Material Hoses 15
4.2.4 Cleaning 15
4.2.5 Handling Hazardous Liquids, Lacquers and Paints 16
4.2.6 Touching Hot Surfaces 16
4.3 Correct Use 17
4.4 Safety Information on Discharges 17
4.5 Use in an Explosion Hazard Area 17
4.6 Notes to German Regulations and Guidelines 17
5 DESCRIPTION 19
5.1 Functional Description 19
5.1.1 Design of the Spray Gun (Basic Version) 19
5.1.2 Functioning of the Spray Gun 20
5.2 Scope of Delivery 22
5.3 Technical Data 23
5.4 Spray Process 24
5.4.1 Air Atomizing Spray Process - Round Jet 24
5.4.2 Air Atomizing Spray Process - Flat Jet 24
5.4.3 Electrostatic E ect 25
6 COMMISSIONING AND OPERATION 26
6.1 Training Assembly/Commissioning Sta 26
6.2 Storage Conditions 26
6.3 Installation Conditions 26