EasyManua.ls Logo

WAGNER GM 5000EA - Cleaning the Parts after Disassembly

WAGNER GM 5000EA
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52
GM 5000EA
OPERATING MANUAL
EDITION 07/2014
ORDER NUMBER DOC
2344499
8.4 CLEANING THE PARTS AFTER DISASSEMBLY
In chapter 13 the part numbers for gun spare parts can be found as well as for wearing
parts such as seals.
Please note:
All reusable parts (except for the parts conducting high-voltage such as cascade,
adapter, plug compl. etc.) should be cleaned thoroughly using a suitable cleaning
agent.
The adapter, plug compl. and the handle inside must be clean and dry after cleaning.
Care should be taken that these parts remain free of solvents, grease or sweat from
the hands (salt water).
Spare parts may have safety-relevant properties.
Use only WAGNER original spare parts and accessories.
Defective parts, O-rings and seal sets must always be re-placed.
ATTENTION
Incompatibility of cleaning agent and working medium!
Risk of explosion and danger of poisoning by toxic gasses.
Examine the compatibility of the cleaning agents and working
media on the basis of the safety data sheets.
WARNING

Table of Contents