21
GM 5000EA
R1
R3
R2
B_03183
16
2
4
3
1
2
3
4
B_03157
OPERATING MANUAL
EDITION 07/2014
ORDER NUMBER DOC
2344499
Distance Description
1 Atomizing air open
2 Atomizing air open and electrostatically
(high-voltage) activated.
Display (2) for "spray current" on the
spray gun
to activated
3 Atomizing air open, electrostatically (high-
voltage) activated and product valve open.
4 Overall way of trigger
The trigger can be used to activate, one after the other, the
various functions of the spray gun.
An increase in the force needed to pull the trigger back will
be perceived at the position where the product valve opens.
For spraying without high-voltage, the high-voltage can
be switched o using the operating button (4). Press the
operating button (4) brie y: High-voltage is switched o .
The standby display (3) illuminates.
In the event of a malfunction the spray gun switches to
"standby" operating mode and the display (3) illuminates.
The width of the spray jet can be adjusted using the air
adjustment (16) (only for at-jet method).
To Next Page
Loading...
