46
GM 5000EA
B_03447
OPERATING MANUAL
EDITION 07/2014
ORDER NUMBER DOC
2344499
Gun ushing
1. Switch o control unit.
2. Ensure that the product pressure is relieved and shut o the atomizing air supply to
the gun.
3. Connect the cleaning agent supply.
4. Set product pressure.
5. Actuate the trigger. Flush the gun through thoroughly.
6. Relieve the pressure from gun and unit!
7. Remove nozzle and clean separately.
8. Clean the spray gun body with a cleaning agent recommended by the lacquer
manufacturer and dry with a cloth or blow gun.
Exploding gas / air mixture!
Danger to life from ying parts and burns.
Never spray into a closed tank.
Ground the tank.
DANGER
NOTICE
Flushing agent in the air duct!
Functional faults caused by swollen seals.
Discharge current to ground -> no high-voltage
Always point the spray gun down when cleaning.
Ensure that neither paint nor cleaning agent enters the air duct.
When taking a break from work or when stored for a longer period, the spray gun
should be positioned with the adapter pointing downwards.
To Next Page
Loading...
