67
GM 5000EA
B
A****
1
2
3
A
BC
D
E
(**)
B_03840
(*)(***)
1
2
3
OPERATING MANUAL
EDITION 07/2014
ORDER NUMBER DOC
2344499
Hose colors:
Product hose black
Air hose blue
Dimensions:
Air hose: inside diameter 6.5 mm; 0.26 inches
Product hose 7.5 m and 10 m: inside diameter 6 mm; 0.24 inch, nominal pressure 2 MPa; 20 bar; 290.07 psi
Product hose 15 m and 20 m: inside diameter 8 mm; 0.32 inch, nominal pressure 1.7 MPa; 17 bar; 246.56 psi
Material of product hose: PA
Order No. Description A [mm] B [mm] C [mm] D [mm] E [mm]
2339167 GM 5000EA hose set (7.5 m) 29±2 47±2 300±10 20±10 1500
+100
2339168 GM 5000EA hose set (10m) 29±2 47±2 300±10 20±10 1500
+100
2339169 GM 5000EA hose set (15 m) 29±2 47±2 300±10 20±10 1500
+100
2339170 GM 5000EA hose set (20m) 29±2 47±2 300±10 20±10 1500
+100
Notes:
(*) Melt the hose ends at both sides (gun/pump) and revert them to the interior by approx. 5 cm.
(**) Fix the protective hose with cable ties on both sides only once at the product hose (internally)
(***) Fix the hose set within the protective hose approx. once per meter by means of adhesive tape, starting
at distance E.
Cable ties are only permitted at the ends of the protective hose (see **)!
(****) If the air swivel joint (order no. 2324766) is used, the hose set has to be adapted.
Dimension A becomes 60±2!
1 Product hose
2 Air hose
3 Electric cable
To Next Page
