Safety Instructions
15
SAFETY, CONTROL, AND INSTRUCTION DECALS
Safety, Control, and Instruction Decals are installed on the machine;
if any are missing, illegible, or damaged, a replacement should be ordered and installed before
putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
Location: Adjacent to Blower Discharge
Chute through Body
Part Number: 8600-4
1. Warning - rotating impeller is a cutting/dismem-
berment hazard to ngers and hands.
● Never reach down into the blower discharge
chute.
2. Warning - thrown object hazard.
● Never engage the PTO with grass catcher
raised.
8600-4
1.
2.
Location: Engine Shroud
Part Number: 5855
8600-16
Location: Rear Cross Member of Front Body
Part Number: 8600-16
Important - Lower front body before lowering
catcher box.
Location: Rear of Grass Catcher Exhaust Screen
Part Number: 5869
Location: Front Body, LH Side Above Muer
Part Number: 8600-12
Warning – carbon monoxide (CO) poisoning hazard.
● CO emitted by a running engine can be deadly.
● Do not operate indoors or in other enclosed areas.
8600 -12
Location: Gearbox Cover
(Gear-Driven Decks Only)
Part Number: 8600-9
Tighten blade nuts on gear-driven decks to 60 lb
·ft
(81 N·m).
8600-9
60 lb·ft (81 N·m)
Location: Front Body, RH Side Adjacent to
Operator Seat
Part Number: 8600-30
Parking Brake
● Move lever forward to engage Parking Brake;
back to disengage.
Location: Front Body, Adjacent to Oil Pressure
Warning Horn
Part Number: 6807-1
6807-1