To Next Page

To Previous Page

Specications

MODEL C19i

SEAT Contour-Molded, with Nylon Backed Vinyl Cover and Integral

Foam Cushion

FRAME/BODY CONSTRUCTION

Frame All Welded Unitized Steel Chassis

Body 14 Gauge Steel

Deck 11 Gauge Steel

GHS Catcher and Chutes Molded Cross-Linked Polyethylene (High Impact Material,

UV Stabilized) for Chutes and Linear Low-Density Polyethylene for

Catcher

GHS SYSTEM

Blower 10.5 in. Diameter, Three-Blade Paddle Wheel

Blower Brake Band Brake [Works in Combination with PTO Clutch, Stops

Blower within Five (5) Seconds of PTO Disengagement]

Max. Blower RPM 4000

Grass Catcher Capacity

gal / bu / L

65 / 7 / 246

Full Signal (Grass-Pak

Switch)

Oscillating Vane Switch Mounted on Grass Delivery Spout Triggers

Horn Signal

Powerl

Oscillating Delivery Spout Driven by 12 Volt Electric Gearmotor

Spreads Material throughout Interior of Catcher @ 35 Cycles/Min

MOWER DECK

Recommended Cut Width

Collection 36 to 52 in. (91 to 132 cm)

Side Discharge 36 to 60 in. (91 to 152 cm)

Mulch 36 to 52 in. (91 to 132 cm)

Cutting Height 1.5 to 4 in. (4 to 10 cm) or

1.5 to 4.5 in. (4 to 11.5 cm) (DS52 & DS60 Belt-Driven Decks Only)

Deck Suspension Independent Torsion-Flex Frame with Caster Wheels and

Counterweight Springs

TOWING

Towing Capacity lb (kg) 250 (113) if equipped with a factory installed or factory authorized

tow hitch

Walker C19i User Manual

Other manuals for Walker C19i