CHAPTER 4 DESCRIPTION OF KEYBOARD FUNCTIONS
ON+SET To switch actinic light on/off.
ON+START To start/stop actinic illumination with yield-
measurement (see menu point 13).
ON+MEM To start/stop the clock for repetitive triggering of
selected function (e.g. saturation pulses when 29:
CLOCK-ITEM in position SAT).
ON+∧ To start/stop a LIGHT CURVE (equivalent to menu
point 17).
ON+∨ To start/stop an INDUCTION CURVE (equivalent to
menu point 21).
SET+OFF To reset program, if MINI-PAM for some reason
does not respond to key-operations.
If the MINI-PAM is switched on by RS 232-access the key-
controller may not respond. In this case push the ON-key once.
Note:Whenever a command is given which involves the switching
on and off of the actinic halogen light source, a short beep-
sound confirms that the command is carried out. In addition,
there is a more extended beep for the duration of a saturating
light pulse.
9
To Next Page
Loading...
