Walz MINI-PAM - Description of the Connectors

CHAPTER 8 COMPONENTS OF THE MINI-PAM
8.1.7 Description of the connectors
CHARGE OUTPUT RS 232 LEAF CLIP
Fig. 4
At the rear side of the MINI-PAM besides the optical fiber
connector the following electrical connectors are located:
a) LEAF-CLIP
The LEAF CLIP socket can be used for connecting the Leaf-Clip
Holder 2030-B (with integrated micro-quantum-sensor and
temperature-sensor) or the separate Micro-Quantum/Temp.-Sensor
2060-M. Connection of one of these devices is required for display
of L (light intensity, given in quantum flux density of
photosynthetically active radiation, PAR, i.e. µmol quanta m
-2
s
-1
), E
(apparent electron transport rate, ETR) and C (leaf temperature in
°C). See also section 8.3.
b) RS 232
An RS 232 interface cable is provided to connect the MINI-PAM
to IBM or IBM-compatible PCs for operation under WinControl
37