Wanco Metro Variable Message Sign - Traffic Data Classifier System

22 Owner’s Manual
Wanco® Metro™ Message Sign
4.5.3 Traffic Data Classifier System
The Wanco Traffic Data Classifier system collects traffic data at the message sign, and
lets you classify that data for analysis using Wanco computer software. The data
collector is installed on the bottom of the message sign display cabinet and is wired to
the message sign computer.
The data collector employs side-fire radar to measure vehicle speed and length. It saves
this information, along with the date and time, in a log file that can be downloaded to a
computer. Wanco’s Data Classifier software interprets and graphs the data for analysis.
Instructions are included with the system.
Wanco Data Classifier software can be downloaded from www.wanco.com. Contact the
Wanco Customer Service Department for details (see Section 1.4, page 2).
The Traffic Data Classifier System is optional, auxiliary equipment that may not be
included with your message sign.
If you want to add the Traffic Data Classifier System to your sign, it can be installed in
the field. Contact the Wanco Customer Service Department for details (see Section 1.4,
page 2).