EasyManua.ls Logo

Warner PC-505B - APPENDIX; Instrument Specifications; Accessories and Replacement Parts; Warranty and Service Information

Warner PC-505B
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PC-505B Manual, Rev. 201013
Warner Instruments
A Harvard Apparatus Company
40
APPENDIX
Specifications
HEADSTAGES
LC-201B Headstage
(50 G/500 )
single channel currents to 200 pA
whole cell currents to 20 nA.
HC-202B Headstage
(50 G/50 )
single channel currents to 200 pA
whole cell currents to 200 nA
HB-205B Bilayer Headstage
(50 Gmodified)
for artificial bilayer capacitances up to 250 pF
currents to 200 pA
Noise (referred to input)
Measured with an 8-pole Bessel
filter, input open, 50 Gresistor:
DC to 1 k Hz 0.038 pA RMS
DC to 5 k Hz 0.170 pA RMS
Bandwidth
25 kHz
VOLTAGE CLAMP COMMANDS
Command In
± 10 V maximum, AC or DC
applied to input
Voltage Hold
± 200 mV with 10-turn control
Junction Zero
± 100 mV with 10-turn control
Internal Test Pulse
1 Volt 50/60 Hz (line frequency) square wave
attenuated by COMMAND SENSITIVITY
Command Sensitivity
attenuates at x0.1, x0.01, and x0.001
Zap
1.0 Volt Pulse
adjustable duration from 0.1 to 10 ms
CURRENT CLAMP COMMANDS
Command In
±1000 pA maximum with Command Sensitivity @ x0.1
±100 pA maximum with Command Sensitivity @ x0.01
±10 pA maximum with Command Sensitivity @ x0.001
Current Hold
± 1 nA with 10-turn control
Internal Test Pulse
1 nA 50/60 Hz square wave
Command Sensitivity
attenuates at x0.1, x0.01, and x0.001
CAPACITANCE COMPENSATION
CFAST 1
(Voltage Mode)
0.1 to 1.75 s
0 to 5 pF
CFAST 2
(Voltage Mode)
0.33 to 8.5 s
0 to 15 pF
CSLOW
0 to 100 pF with 10turn control
Series R
0 to 100 M with 10turn control
% Correction
0 to 90% of series R
Leak Subtraction
50 G Headstage Resistor: to 50 G
500 M Headstage Resistor: to 500 M
50 MHeadstage Resistor: to 50 

Table of Contents