25
Programming
1473
1030
42
41
Coin-operated machines
The prices of the various wash cycles must be
programmed into the microprocessor. On
EMERALD SERIES washers you can program
different prices for the seven cycles!
You can also program the prices to drop by any
percentage between any hours of any days,
automatically!
Price programming
• Remove the coin box.
• Press one wash cycle button so an arrow
points to it.
• Toggle and
hold the price programming switch
located at the back of the coin box in the PP
(price programming) position.
This transforms the various buttons into a
numerical keypad. Numbers 1 - 7 are on the
wash cycle buttons, the Extra Extract button is
8, and the Gentle Wash button is 9. The
START button is 0.
Fig.
41
Fig.
42
To Next Page
Loading...