I
17
Electrochlor Mineral Chlorinator
Valve actuator is powered by a 24V AC transformer (sold separately) and connected to
the Electrochlor via the 24 VAC jack input.
Spa Mode/Low Chlorine Output
The Spa Mode/Low Chlorine OUTPUT is a 24V dry contact which is activated when
Spa Mode/Low Chlorine mode is enabled. This socket may be used on compatible
equipment e.g. reducing the chlorination level to the spa whilst in spa mode or when a
pool cover is activated.
This function can also be triggered by Waterco’s Aquamaster, whenever the Spa mode
in activated.
This mode can be activated automatically by connecting a Normally Open (N.O),/
Normally Close (N.C.) contacts directly the chlorinator main board.
To Next Page
Loading...
