WL2FLT Manual Page 38 – Revision 10-26-2021
FAULT CODE TROUBLESHOOTING INDEX
1. Red Light Flashing and Beeping
2. Green Light Flashing and Beeping
3. Orange LED Light (Indicates Heater is ON - this not an error or fault)
4. No LED Light
1. FAULT CODE: Red Light Flashing and Beeping indicate that the Leak Detector has
sensed water in the Leak Tray and will shut down inlet solenoid.
Water is present in the Bottom
Tray, causing the leak
detection to trigger.
*Leak Detection is on the
Counter Top Model only.
Remove the Top Cover and Front Panel. Tip the unit slightly
to drain, dry Bottom Tray completely.
Leak in WL2FLT Water
Treatment System Counter
Top
Water is in the bottom of the WL2FLT Water Treatment
System. Clear Leak Detection Tray to ensure inside of unit is
dry.
Check for source of leak and fix as necessary.
To Next Page
Loading...
