To Next Page
M
mallorygrahamAug 3, 2025
What to do if the WaterLogic Water System red light is flashing and beeping?
- JJoanna NelsonAug 4, 2025
If the red light is flashing and beeping, it indicates water is present in the Bottom Tray, triggering the leak detection. To resolve this, remove the Top Cover and Front Panel, then tip the unit slightly to drain and completely dry the Bottom Tray. If that doesn't work, the issue may be a leak in the WL2FLT Water Treatment System Counter Top. In this case, clear the Leak Detection Tray to ensure the inside of the unit is dry and check for the source of the leak, fixing it as necessary.
General
