WaterLogic WL2FLT - Replacement Components (Consumables)

WL2FLT Manual Page 21 – Revision 10-26-2021
REPLACEMENT COMPONENTS - CONSUMABLES
Component
WLCP PN
Frequency of Replacement
15W LTFW XTM UV Lamp
Assembly
12-8310
Every 12 months, or as required
Factory Part No CT-2085-IA0-00
Hot Tank 120V/500W - 1.6L
with Thermistor
10-4029
Replace every 3 to 5 years depending
on usage.
Factory Part No HT-3024
Sediment Filter - 10"
20 Micron Inline Filter
FT-0053-IL
containing FT-0055
Filter Element
Every 12 months or every 1,250
gallons.
Factory Part No FT-0053-IL Assembly
containing FT-0055-WLT Filter Element
1-micron 10" Inline CBC Filter
for CTO, Lead, Cyst and
Asbestos Reduction (Carbon
Block) NSF 53
Required for NSF Certification
FT-0014-IL
containing FT-0007
Filter Element
Every 12 months or every 1,250
gallons.
Factory Part No FT-0014-IL Assembly
containing FT-0007-WLT Filter Element
10-micron 10" Inline GAC Filter for
Taste and Odor Reduction (Grannual
Activated Carbon) NSF 42
Required for NSF Certification
FT-0035-IL
containing FT-0038
Filter Element
Every 12 months or every 1,250
gallons.
Factory Part No FT-0035-IL Assembly
containing FT-0038-WLT Filter Element
* One pre-installed. One required for NSF-42 / NSF-53 Certification.
CAUTION! Use only Waterlogic Replacement parts that can be obtained from Waterlogic or an
Authorized Waterlogic Dealer, failure to do so will void the Warranty.
See Installation and Service Manual for additional information.
Hot Tank Service
Hot Tanks (with controls) must be replaced at least every 3-5 years depending on usage. Descaling
hot tank may be required on a regular basis depending upon filtration and local water conditions.
See Installation and Service Manual for further details.
Surface Cleaning
Clean on a regular basis with damp lint free cloth. Never use harsh chemicals (alcohol or acid based)
or abrasive agents on any part of the product to avoid damage. A mild cleaner such as Simple Green
or equivalent is recommended.
DISPOSAL
End of Life
At the end of this product’s life, ensure that it is disposed of in an environmentally friendly manner
which is fully compliant with all Federal/State/Local Requirements and Guidelines. Do not dispose
of this appliance with normal household or business waste.