EasyManua.ls Logo

Watlow ez-zone pm - Page 87

Watlow ez-zone pm
133 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Watlow EZ-ZONE
®
PM Integrated Controller 84 Chapter 6 Setup Page
Setup Page
Dis-
play
Parameter name
Description
Range Default
Parameter
Appears
in Menu
When
Modbus Rela-
tive
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Data
Type
&
Read/
Write
[iP;F1]
[ip.F1]
Communications (2)
IP Fixed Address
Part 1
Set the IP address
of this module. Each
device on the net-
work must have a
unique address.
0 to 255 169 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;F2]
[ip.F2]
Communications (2)
IP Fixed Address
Part 2
Set the IP address
of this module. Each
device on the net-
work must have a
unique address.
0 to 255 254 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;F3]
[ip.F3]
Communications (2)
IP Fixed Address
Part 3
Set the IP address
of this module. Each
device on the net-
work must have a
unique address.
0 to 255 1 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;F4]
[ip.F4]
Communications (2)
IP Fixed Address
Part 4
Set the IP address
of this module. Each
device on the net-
work must have a
unique address.
0 to 255 1 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;F5]
[ip.F5]
Communications (2)
IP Fixed Address
Part 5
Set the IP address
of this module. Each
device on the net-
work must have a
unique address.
0 to 255 0 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;F6]
[ip.F6]
Communications (2)
IP Fixed Address
Part 6
Set the IP address
of this module. Each
device on the net-
work must have a
unique address.
0 to 255 0 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;S1]
[ip.S1]
Communications (2)
IP Fixed Subnet
Part 1
Set the IP subnet
mask for this mod-
ule.
0 to 255 255 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
Note:
Some values will be rounded off to fit in the four-character display. Full values can be read with other
interfaces.
* Available with PM4, PM8 and PM9 models only
R: Read
W: Write
E:
EE-
PROM
S:
User
Set

Table of Contents

Other manuals for Watlow ez-zone pm

Related product manuals