Watlow ez-zone pm - Page 88

Watlow EZ-ZONE
®
PM Integrated Controller • 85 • Chapter 6 Setup Page
Setup Page
Dis-
play
Parameter name
Description
Range Default
Parameter
Appears
in Menu
When
Modbus Rela-
tive
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Data
Type
&
Read/
Write
[iP;S2]
[ip.S2]
Communications (2)
IP Fixed Subnet
Part 2
Set the IP subnet
mask for this mod-
ule.
0 to 255 255 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;S3]
[ip.S3]
Communications (2)
IP Fixed Subnet
Part 3
Set the IP subnet
mask for this mod-
ule.
0 to 255 0 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;S4]
[ip.S4]
Communications (2)
IP Fixed Subnet
Part 4
Set the IP subnet
mask for this mod-
ule.
0 to 255 0 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;S5]
[ip.S5]
Communications (2)
IP Fixed Subnet
Part 5
Set the IP subnet
mask for this module
0 to 255 0 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;S6]
[ip.S6]
Communications (2)
IP Fixed Subnet
Part 6
Set the IP subnet
mask for this mod-
ule.
0 to 255 0 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;g1]
[ip.g1]
Communications (2)
Fixed IP Gateway
Part 1
0 to 255 0 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;g2
[ip.g2]
Communications (2)
Fixed IP Gateway
Part 2
0 to 255 0 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;g3]
[ip.g3]
Communications (2)
Fixed IP Gateway
Part 3
0 to 255 0 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;g4]
[ip.g4]
Communications (2)
Fixed IP Gateway
Part 4
0 to 255 0 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;g5]
[ip.g5]
Communications (2)
Fixed IP Gateway
Part 5
0 to 255 0 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
[iP;g6]
[ip.g6]
Communications (2)
Fixed IP Gateway
Part 6
0 to 255 0 If address
mode is
set to
fixed.
- - - - - - - - - - - - - - - -
Note:
Some values will be rounded off to fit in the four-character display. Full values can be read with other
interfaces.
* Available with PM4, PM8 and PM9 models only
R: Read
W: Write
E:
EE-
PROM
S:
User
Set