Section 3 Auto-Zone Plus
3-44 Programming
Note The second line displays which day of the week is currently being
programmed. This automatically increments as you finish the Stop Time and
continue to the next Start Time screen.
Holidays
Holiday Day Selection
Holiday Start / Stop Times
Program Holidays
Holiday # 1
Start Mon/Day: 101
(EX: 101 = Jan. 1)
The screens will step through the eleven possible holidays, one
at a time. Line 2 shows which holiday is currently being
programmed.
Remember to combine the month and day into a single four
digit value.
EXAMPLE: 0704 = July 4th
1225 = December 25th
Program Holidays
Holiday Schedule
Starting Time: 0
Stopping Time: 0
The eleven holidays all use the same Start and Stop time
which is entered on this screen. It is entered in 24-hour military
format, the same as a regular week schedule.
To Next Page
Loading...
