To Next PageTo Next Page
Need help?Do you have a question about the WaveWare Rauland responder 5000 and is the answer not in the manual?
Details the hardware and software components of the RMS server.
Describes the capabilities of the Rauland Responder 5000 Messaging Server.
Configuration of the RMS Base Mode of operation, including data inputs and outputs.
Enables advanced alert processing, routing, and escalation management features.
Definitions of key terms used throughout the manual.
Steps and requirements for installing the RMS system.
Procedure to set a static IP address for uninterrupted operation.
Steps to use the WaveWare Discover and Reset Tool for system discovery.
Instructions for accessing and logging into the RMS web interface.
Overview of how to configure the RMS via a browser-based interface.
Core system settings including IP address, time zone, and event processing.
Configuration of incoming data streams and outgoing alert delivery.
Associating Data Inputs with Data Outputs for alert routing.
Configuration of rooms and their association with sensors and zones.
Configuration of residents and their assignments.
Setting up zones and assigning sensors, users, and outputs to them.
Configuration details for WaveTrac and Inovonics sensor types.
Defines priority, color, and filtering for incoming alert messages.
Configures how messages are displayed on LED displays.
Configuration of scheduled delivery of specific reports via email.
Allows generation of custom reports displayed in a browser or emailed.
Steps to troubleshoot problems discovering the RMS using the WaveWare tool.
Overview of the Messaging App features, installation, and notice handling.
Implementing Inovonics sensor monitoring with RMS and the Responder 5000 app.
Protocol for systems to push data to RMS via HTTP GET or POST methods.
General