51
November 2008 Part No. 920559 Rev H
1.3 Configure Card Reader, continued
Step 3 Answer NO to the above prompt.
Step 4 Answer the following prompts as they appear:
This prompt should be set to yes only if the dispenser has softkeys along side the QVGA display. On
dispensers without softkeys, answer No to the above prompt, otherwise, the numeric keypad will not work
when the dispenser is online.
Select NO to the above prompt unless installing softkeys for the first time.
Offline msg: Out
of Service (Y/N)
Fixed Length Scanner?
(Y/N)
SOFT KEY PRESENT?
(Y/N)
FULL SCREEN MODE?
(Y/N)
INITIALIZE FLASH AREA?
(Y/N)
To Next Page
Loading...
