24
11 The GigaControl software
11.1 General
The weatronic GigaControl software offers a multitude of options for programming you system, for example, output channel allocation, delay, sequen-
cing, synchronising groups of servos and many more functions.
Another useful feature is the option to store the settings which you have selected on your computer for future use.
11.2 Installing the software
Note: The GigaControl software must be fully installed onto your PC before you connect a 2.4 Dual FHSS receiver to the
computer via the USB cable.
• Place the installation CD into the CD/DVD drive of your computer. The CD contains the weatronic software packet, the weatronic GigaControl,
the firmware for the transmitter module, firmware for both receiver variants as well as configuration examples.
• The installation program should start automatically. Follow the on-screen instructions.
• If you have switched the auto-start function off on your computer you will have to open ‘My Computer’ and select your disk drive. Use the Explo-
rer option to open the disk and select GigaSetup.exe from the list. This will start the installation assistant and you should then follow the ins-
tructions on your screen to install the GigaControl Software.
Double clicking the Icon GigaSetup (weatronic program setup) will open the following window:
Select your desired language and click ‘OK’. The following window Click ‘Next’ to open the next window:
will open:
To Next Page
Loading...
Need help?
General