25
INSTRUCTION MANUAL
The GigaControl Software will be installed into the directory shown. Click ‘Next’.
Click ‘Next’ to accept the choice of folder and the following
information window will open: After a few seconds the following window will open:
Click ‘Install’ and the GigaControl software will begin with the in- Wait until the installation is complete at which time the following
stallation. After a few seconds the following window will open: window will open:
Please click ‚Finish’ to complete the installation and the software will have been installed onto your computer.
Using Windows Explorer the path C:\Programs\Weatronic\GigaControl will reveal the Icons for the software which has been installed as well as the
folder ‘Firmware’ which contains the latest software versions for the weatronic transmitter module and receivers.
To Next Page
Loading...
Need help?
General