Has muffler and exhaust tube been routed a safe distance from
flammable material?
Ensure drain-holes are drilled in low bend areas of exhaust tube.
Ensure exhaust is venting a safe distance from any vehicle interior
openings.
Ensure exhaust is venting in the direction that will not cause back
pressure while driving.
(Yes/No/Comments)
Is the combustion air intake drawing fresh air from a non-turbulent
location? (i.e. not in direction of travel)
Ensure the air intake system is securely fastened.
(Yes/No/Comments)
Ensure the heater starts and runs for a minimum of 20 minutes.
Ensure vehicle blower operates as intended.
Ensure warm air is blown out of interior vents after blower is activ-
ated.
Ensure timer (control element) is functioning.
Check and Modify CO2 setting as needed based on allowable alti-
tude limits.
(See service manual for instructions to make adjustment)
(Yes/No/Comments)
Has the vehicle interior, engine compartment, & glove compart-
ment been inspected for cleanliness after installation.
Has the user manual been placed in the glove box?
Is the vehicle clock time correct after disconnecting the battery?
To Next Page
Loading...
