10
zag, concentric, cross and octet as follows:
The shape of each filling method is as follows:
Lines— ；Grid— ；Triangles— ；
Zig Zag— ；
Concentric— ；Cross— ；Octet— 。
Infill before walls: that is to choose whether to print the model after filling and print the outline.
Outer before inner: that is to choose whether to print the outline of the model before printing the
internal walls.
Gradual infill steps: that is, for the model that needs to gradually change the fill rate of the model,
determine how many layers change the fill rate once.
Generally, the above items do not need to be changed.
3.2.3、"Support" interface:
To Next Page
Loading...
