Need help?Do you have a question about the WEEDO M2 and is the answer not in the manual?
Provides crucial safety guidelines for operating the 3D printer.
Step-by-step guide for installing the necessary Cura software.
Instructions on how to connect the 3D printer to its power source.
Guide on loading and preparing the filament for printing.
Steps to prepare the printer and materials before starting a print.
Instructions on how to select and start a print job.
Guidance on safely removing the finished print from the platform.
General guide covering essential daily maintenance tasks for the printer.
Procedure for cleaning the printer's nozzle to ensure optimal print quality.
Steps for checking and leveling the print platform for accurate prints.
Guidance on maintaining and replacing the printer's nozzle assembly.
Instructions for cleaning the nozzle and the motor gear assembly.
Step-by-step guide for removing and replacing the printer's nozzle.
General| Filament Diameter | 1.75 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Connectivity | USB, SD Card |
| Frame Material | Metal |
| Nozzle Temperature | Up to 260°C |
| Bed Temperature | Up to 100°C |
| Supported Materials | PLA, ABS, TPU |
| Power Supply | 110V/220V |
To Next Page
