WEEDO M2 - Printing Model

15
Print the first model
Press down the power buon at the rear panel, and start up the printer
power supply.
4.4. Prinng Model
On the operaon panel, choose “Print the files in the SD card”→”02▁
ThinwallCub.x3g”, press OK buon to start prinng.
SD Meun
>
02_ThinwallCub.x3g
yz50.x3g
XTEST.x3g
XYtest.x3g
Extruder :020C
WEEDO M2
>
Print from SD
Preheat
Utilities
Setting&Info
Extruder :020C