21
Wegaconcept
User manual
ENGLISH
Con rm the selection by pressing the ENTER key
and the display will show the following:
13.5 Date and time adjustment
In this section it is possible to set the date and
time shown on the machine's display.
Scroll through the menu until the item
“04 CLOCK SETUP” is highlighted;
The value to be changed will ash.
To change the value, press the () key or ()
key.
To move to the next or previous parameter, press
the () key or () key, and repeat the modi cation
process.
To con rm and exit the menu, press the ENTER
key.
H hours
M minutes
DD day 1 Monday
MN month 2 Tuesday
YY year 3 Wednesday
D day of week
4 Thursday
5 Friday
6 Saturday
7 Sunday
con rm the selection by pressing the ENTER key
and the display will show the following:
13.4 Cup heater temperature adjustment
This menu allows the user to adjust the operating
temperature of the cup heater or switch it o .
Scroll through the menu until the item
“3 CUP HEATER TEMP.” is highlighted;
The value of the temperature will ash.
To change the temperature (from 70 to 114 °C),
press the () key or () key.
To con rm and exit from the adjustment mode,
press the ENTER key.
i
If a temperature above 114°C is set, the indica-
tion CUP HEATER ON will appear on the display
and the cup heater will be activated in continu-
ous operation.
i
If a temperature lower than 70°C is set, the indi-
cation CUP HEATER --- will appear on the display
and the cup heater will be deactivated.
i
To turn the cup heater on and o , read chapter
8.1.
01 COUNTERS
02 SERV.BOILER PRESS
03 CUP HEATER TEMP.
04 CLOCK SETUP
1 COUNTERS
2 SERV.BOILER PRESS
3 CUP HEATER TEMP.
4 CLOCK SETUP
CLOCK SETUP
H:M DD-MM-YY D
01 COUNTERS
02 SERV.BOILER PRESS
03 CUP HEATER TEMP.
04 CLOCK SETUP
01 COUNTERS
02 SERV.BOILER PRESS
03 CUP HEATER TEMP.
04 CLOCK SETUP
CUP HEATER
85 .C
Legend
To Next Page
Loading...
Need help?
General
