______________
5.2.1 Save JEDEC File
For PLD devices, the save JED file dialogue box will pop-up. It consists of Name (input line), File (list viewer),
OK and Cancel Buttons. You can indicate the directory and the name of the file to be saved in the input line,
labeled Name.
5.2.2 Save HEX File
For ROM (E(E)PROM, SEPROM, MCU/MPU) device types, the box named Save Buffer will be displayed.
After you input the file name and click OK, the box named Save Buffer to a file will be displayed. This
dialogue box consists of an input for From Buffer address, another input line for Save size, buttons for File
Format, and the OK and Cancel Buttons. The format of the file that be saved must also be selected in the File
format area by pressing one of the selection buttons.
5.3 Exit
This command closes the programmer software and returns to the control of operating system.
Tianjin Weilei Techonlogy Ltd.
www.weilei.com TEL:022-83945122
FAX：022-83945121 2018-03-08
To Next Page
Loading...