______________
You can store for further usage without setting every time. It could avoid the setting error. It is recommended
to use it when mass production.
Note that: there is a connection between the Project file and the programmer software. It would be invalid
after the software is updated.
10.4.1 Save Project
This option lets you save the current environment to a project file.
10.4.2 Load Project
This option lets you load the current environment that had been saved from a project file. The data saved
includes the current device, option/configuration setting and buffer data and so on.
10.5 Option
Log file Setting
This option associates with using of Log window. All reports for Log window can be written into
the Log file too.
Following Log file options are available:
¨ option No (default) - content of Log window is not copied to Log file, i.e. all reports will be
displayed to Log window only.
¨ option New – create a new log file every day.
¨ option Append - adds Log window reports into existing Log file. If file does not exist, the
new file will be created.
Log file name:
¨ When you check the option New, the log file name is like :
report-yyyy-m-dd.rep
The middle part representing of date consists of yyyy - year, m - month and dd - day.
Example
: If today is May, 29th, 2012 then the log file name is
D:\Program Files\weilei\wellon\report-2012-5-29.rep
The next day it will create a new log file and its name is
D:\Program Files\weilei\wellon\report-2012-5-30.rep
¨ When you check the option Append, the log file name is :
D:\Program Files\weilei\wellon\report.rep
Load file :
Tianjin Weilei Techonlogy Ltd.
www.weilei.com TEL:022-83945122
FAX：022-83945121 2018-03-08
To Next Page
Loading...