weinor BiEasy 15M - Power Supply; Operating Mode

30 | EN Ⓒ weinor GmbH & Co. KG
Ⓒ weinor GmbH & Co. KG EN | 31
4.5.3 "Function" menu
Factory setting submenu
The selection and confi rmation of this menu item resets all
settings to the factory setting, except for the channel-related
receiver allocation (language, customised texts, group
allocations, runtimes, product display, automatic mode
status). Settings must be redefi ned if necessary.
Factory settings
of the BiEasy 15M
Standard
setting
Administration
• Channels
• Groups
• All
Allocations
text fi eld 1
text fi eld 2
none
empty
empty
Settings Language
Lighting
German
On
Settings
• Channels
• Groups
• All
Product selection
Intermediate
position
Ventilation
position
Roller shutter
or depending
on programmed
receiver
Without
runtime setting
Without
runtime setting
Function
• Expert
All On/Off
INFO On/Off
All On
INFO On
Tab. 10 Factory settings of the BiEasy 15M
Expert submenu
"All On/Off"
The master channel is available in the factory setting:
"All On".
If this is not wanted or does not appear appropriate
(e.g. with mixed operation with roller shutters and awnings),
the function can be disabled with "All Off".
If the "All Off" setting is selected, the control and
programming options of the master channel are disabled.
"INFO On/Off"
On or Off function for the periodic query of the individual
channels when starting and during travel motion in the
group or in the master channel. The shut-off of radio traffi c
during transmission in the group can be greatly reduced
depending on the individual channels in the group or in
the master channel. In the case of cut-out the position
display is updated by the internal of the transmitter.
"Version" submenu
Display of current fi rmware version