3-10
Operation Section 3
SOUND & SCREEN TESTS
This screen does not require a passcode.
Sound & Screen Tests
Screen is for testing sound and screen function.
Three beeps should sound when the speaker icon is
selected.
When the screen icon is selected three screens will cycle to
help diagnose screen function.
UI Customization button not available to users.
ERRORS LOG SCREEN
This screen does not require a passcode.
Errors Log Screen
Clear all button removes all entries on the errors log
screen. Clearing the error log requires a service passcode.
Touching the Refresh button will update the error list.
Swiping away from this page and then swiping back will
also refresh the error log list with any new errors.
PASSWORD SETTINGS SCREEN
Password Settings Screen
There is a factory default manager passcode 1955. It can be
changed on the password service screen. Select the open
box after Manager’s: and a new pin # number pad will pop
up. Enter the new manager’s passcode and the green check
to confirm.
New Pin # Number Pad
To reset the passcode back to the factory default quickly
touch the easy touch logo 10 times in a row in any of the
settings screens. At the end of 5 taps the menu bar will
turn black, continue to tap. A pop up display will confirm
the manager’s pin # was reset.
Easy Touch Logo
To Next Page
Loading...
Need help?
General
