13
Battery replacement
Scale setup
You can customize the scale to best suit your needs using the Custom Modes.
The custom modes on the scale are Setup, Service, Factory, Calibration.
1. Press and hold ZERO and REWEIGH while pressing the power button to enter Custom mode.
2. Key in different PIN to access the mode.
Some menu items include editors. These can be interacted with using the following keys: (e.g. Show
‘0000’ as initial 4 digits PIN):
REWEIGH: Increment the selected character. If the current selected character is “9”, it shall
wrap to “0” when the “Reweigh” button is pressed.
RECALL: Decrement the selected character. If the current selected character is “0”, it shall wrap
to “9” when the “Recall” button is pressed.
LB/KG: Move to the next character/enter.
Keying through the menu with the LB/KG key will show the option, then the current setting for that
option. To change a setting select the current setting for the desired option and use the REWEIGH
key to increment or move to the next setting option, or the RECALL key to decrement or move to
To Next Page
Loading...
